Measure· Mon · 09:00
Measure on site with your phone.
The tape measurement goes straight into the project. No paper in your pocket.
2D · 3D · CUTTINGProfessional software for stone shopsThe precision your
The precision your
stone shop always needed.
Drawings to the millimetre, quotes in seconds, cuts without mistakes.
0.001 mmof precision on every vertex of the drawing
L-shaped countertop
30 sfrom drawing to quote
Stone$3,650
Cutouts$320
Edge 4.6 m$280
$4,25042%
Cutting plan87%
Processfrom first contact to the installed piece
Marmos is with you through the whole process.
Monday morning you measure. By Thursday the piece is installed. One typed measurement becomes the drawing, the quote, the approval, the DXF, the cutting plan and production. Nobody retypes anything.
Start · site measurement
- Design· Mon · 10:15
Draw with CAD precision.
Dimensions, cutouts, apron and backsplash. Every line is already production data.
- Quote· Mon · 10:16
Quote in 30 seconds.
Area, edge finishes and cutouts with your margin. PDF ready to send.
- Approval· Mon · 15:40
The customer approves in 3D.
They open the link, spin the piece in the chosen stone and approve from their phone.
- DXF· Tue · 07:50
The drawing becomes a complete DXF.
Cut, cutouts, polish and 45° on separate layers. Ready for the CNC, with no redrawing in CAD.
- Cutting· Tue · 08:05
The slab comes out planned.
Numbered pieces, cutting sequence and the offcut back in inventory.
- Production· Thu · 08:00
Follow it through to installation.
Every order moves across the board, from the saw to delivery, alongside the team schedule.
Piece installed · margin checked
And behind it all:Slab and offcut inventoryTeam scheduleFinance and margin per order
Behind the counterwhat keeps the shop standing
Management straight to the point.
You have seen the job flow. Here is the rest: yard, money, schedule, catalog, machine and customer, all tied to the same drawing.
GEOMETRIC INVENTORY
Every remnant with shape and size. And a destination.
Slabs and offcuts sit in the yard with their real geometry. In the cut plan, a remnant goes on the table like any slab, before you open a new one.
YARD · BRANCO ITAÚNAS3 slabs · 2 remnants
IN THE CUT PLANThe 50 × 40 vanity top from order #1043 fits the 51 × 45 remnant.One less new slab.
IN THE YARD NOW
42.6m² in slabs
6.1m² in remnants
FINANCE WITHOUT GAPS
Know what each job left you.
Receivable · 30 days
$48.2k
Average margin
41%
#5 Kitchen46%
#3 Counter33%
TEAM SCHEDULE
The team’s day on the phone screen.
Templates, deliveries and installs by day, week and month, in the phone browser, nothing to install.
STONE CATALOG
Price and margin by thickness.
CUT SIMULATOR
See the cut before the machine does.
Toolpath and DXF for CNCDXF
CUSTOMER LINK
Fewer “so, when will it be ready?”
- And also:
- Material and margin reports
- PT · EN · ES · IT · FR
- Light and dark mode
Quoting System
Make any quote that would take hours of conversation in seconds.
Simply draw it, show it to them, and you're done. Marmos prices the square meter, skirts, backsplashes, and cutouts at the click of a button.
2D · 3D · CUTTINGL-shaped countertop
30 sfrom drawing to quote
Smart Rules
The system calculates waste and the geometric loss of the slab.
Fast Closing
Generate the quote PDF on the spot and send it directly to the client's WhatsApp.
Quote #1042APPROVED
- Stone
- $3,650
- Cutouts
- $320
- Edge 4.6 m
- $280
Total$4,250
Guided Production
The end of lost paper on the factory bench.
The project drawn in the office turns into an automatic cutting map. The sawyer follows the queue on the tablet, and you know exactly what stage each piece is in.
KanbanSaw queueCutting plans
Today10
9
8
7
6
5
Waiting to start
2 assemblies
1 assembly
Left to cut
10 stones
9 stones
8 stones
7 stones
6 stones
5 stones
Ready for delivery
1 assembly
2 assemblies
Needs your action
0 fully cut
1 fully cut
0 fully cut
Waiting
Released, not started2
1
#1042Ana Ribeiro · Kitchen
L-shaped countertop0/5 stones cut
1/5 stones cut
2/5 stones cut
3/5 stones cut
4/5 stones cut
5/5 stones cut
Not started
Cutting
All cut
Ready
Start production
At the saw · 5 left
At the saw · 4 left
At the saw · 3 left
At the saw · 2 left
At the saw · 1 left
Mark as ready
Record delivery
#1043Júlia Castro · Powder room
Top0/2 stones cutNot started
In production
On the shop floor1
2
1
#1041Marcos Lima · Kitchen
Island2/5 stones cutCutting
Ready
Cut and finished · awaiting delivery1
2
#1039Studio Alfa
Backsplash3/3 stones cutReady
#1042 · L-shaped countertop moved to In productionUndo#1042 · L-shaped countertop moved to ReadyUndo
Real-time tracking via Kanban.
No more drafting interpretation errors.
PHONE · TABLET · COMPUTER
On site, on the shop floor and in the office. The same measurement everywhere.
From measuring on site to the cutting bench in the factory. Marmos is 100% responsive and designed to run perfectly on mobile, tablet, or computer, without needing to install anything.
In the Office
Use the large computer screen to draw complex pieces in the 2D engine and close the quote margins.
In the Factory
Paperless production: sawyers and finishers check the cutting map and move the production Kanban on a tablet.
On Site
Mobile in hand: schedule, take photos of the environment, and record precise measurements from the client directly in the system.
IN 10 COUNTRIES
Measurement is universal.
Stone shops in several countries already cut with Marmos, each in its own language and its own unit.
- countries
- 10
- languages
- 7
- your unit
- mm · in
Olá, marmorista! · Brasil
+30
The marmos. was born in a marble shop with over 30 years in the market
All our technology brings this experience straight to yours.
Frequently Asked Questions
Clear your main doubts about how Marmos works.
Do I need to install any program on the marble shop's computer?
No. Marmos runs 100% in the cloud (web). You and your team can access it from anywhere, using a computer, tablet, or mobile phone, as long as you have an internet connection.
How does the Parametric Engine calculate the price and slab loss?
Unlike common systems that use generic formulas, Marmos analyzes the real drawing of the piece. It automatically calculates the square meter, edges with finishes (skirts, miters), and internal cutouts, adding all costs to the quote.
Can the sawyer see the project on their phone in the factory?
Absolutely. The Kanban section was designed exactly for this. Upon approving a project, it goes straight to the Production screen. Your factory team follows the workflow and cutting map in real-time via tablet or mobile.
Can I import CAD projects (DWG/DXF) from architects?
No — and the reason is precision. An architect’s DWG draws the outline, not the fabrication: it does not know what an apron, a build-up or a mitred joint is. In Marmos every gesture records a production fact, and that same geometry yields the 3D, the price, the cut map and the DXF. Redrawing the countertop in the engine takes seconds, and it comes tied to the job.
Do you migrate my price lists?
Yes! Our team of experts helps you configure your entire materials list (Marbles, Granites, Quartzes), labor costs, and supplies so that margins in the system are accurate from day 1.
Do I need to know CAD or AutoCAD to draw in Marmos?
No. Drawing is done by dragging. Pull a corner of the stone inward and it rounds off — and when you round the second corner, it snaps to the same radius as the first, which is how you get all four corners equal without typing a radius. Aprons, backsplashes, laminated edges and cutouts go on with one click on the edge. What a CAD does with a command and a dialog, this does with a gesture — and every gesture already feeds the price, the cut sheet and the DXF.
Does Marmos optimize slab yield?
Yes. The cut plan is a guillotine tree: every cut splits one rectangle in two, so any arrangement is cuttable on a bridge saw and the cutting sequence comes out numbered. It consumes the blade kerf, trims only the sides that need it, locks rotation for stone with directional veining, and returns every offcut as an exact rectangle that becomes a new slab in stock. You choose the strategy: shelves for a bridge saw, free rectangles for CNC.